CCM T2

The CCM T2 was a .68-calibre pump-action paintball marker made by Chipley Custom Machine. A February 2009 discussion on the German paintball forum pbhub.de preserves photographs and a hands-on report of an early example.[1][2]

Design

The T2 used two pump arms connected to the rear block and a removable upper breech tube secured to the lower body. It used an Autococker-pattern barrel, a clamping feedneck and a vertically mounted regulator. Its autotrigger linked to a pump arm and allowed the marker to fire at the end of each completed pump stroke while the trigger was held.[2]

CCM lists the T2 as a separate pump model alongside the Series 6 and Series 6.5, and publishes model-specific technical videos.[3][4]

References

1. pbhub.de, CCM T2, discussion opened 7 February 2009
2. Pumpenstein, The Unofficial Manual of the Chipley Custom Machine T2 Pump Marker
3. CCM Factory Direct, T2 product category
4. CCM Factory Direct, T2 technical videos