Editing CCM Series 6

The '''CCM Series 6''', also called the '''S6''', was a .68-calibre pump-action paintball marker made by [[Chipley Custom Machine]]. VintageRex dates its Series 6 entry to 2006. CCM documents both the production Series 6 and a separately identified Series 6 prototype in its technical support material.[1][2]

== Design ==

The Series 6 had a vertically mounted regulator, a clamping feedneck and a removable Autococker-pattern barrel. The pump moved a rear block connected to the bolt and cocking rod. An autotrigger cam linked to the pump arm allowed the marker to fire at the end of the pump stroke while the trigger was held.[3]

Pumpenstein's service manual covers the production Series 6 alongside the [[CCM Series 5|Series 5 Basic]]. It identifies differences in the body milling, pump and ball detents. A separate manual covers the Series 6 prototype alongside the [[CCM SS25|SS25]].[3][4]

== References ==

# [https://www.vintagerex.com/cgi-bin/index.cgi?action=viewmarker&man=CCM+-+Chipley+Custom+Machine&marker=Series+6 VintageRex, Series 6]
# [https://store.chipleymachine.com/tech-videos/ CCM Factory Direct, technical videos for the production Series 6 and Series 6 prototype]
# [https://pbmanuals.com/downloads/709_CCM_CCM_Series_6_Manual_ENG.pdf Pumpenstein, The Unofficial Manual of the Chipley Custom Machine Series 5 Basic and Series 6 Pump Markers]
# [https://pbmanuals.com/downloads/CCM_Manual_SS25andSeries6Prototype.pdf Pumpenstein, The Unofficial Manual of the Chipley Custom Machine SS-25 and Series 6 Prototype Pump Markers]

[[Category:Paintball equipment]]