Editing CCM J2

The '''CCM J2''', also marketed as the '''J2 Pro Series''', was a paintball marker made by [[Chipley Custom Machine]] in pump-action and mechanical semi-automatic versions. The two versions shared a CCM-manufactured body. WARPIG's review identifies its test pump as a marker displayed at CCM's booth at the 2002 Paintball World Cup in Orlando, Florida.[1]

== Design ==

The J2 had a vertically fed breech, a clamping feedneck, a wire ball detent and Autococker-pattern barrel threads. The pump version used an under-barrel handle guided by two rods, while the semi-automatic version used a pneumatic front block. WARPIG documented that the pump could be converted to semi-automatic operation by fitting the corresponding pneumatic components.[1]

An optional autotrigger linked the trigger to the pump arm, allowing a shot at the end of each completed pump stroke while the trigger was held. CCM's archived online shop still listed the J2 in January 2005.[1][2]

== See also ==

* [[CCM J2L]]

== References ==

# [https://www.warpig.com/paintball/technical/paintguns/ccm_j2pump/ Bill Mills, CCM J2 Pro Series Pump, WARPIG]
# [https://web.archive.org/web/20050123164950/http://www.chipleymachine.com/store/ Chipley Custom Machine online shop, archived 23 January 2005]

[[Category:Paintball equipment]]