Editing Darkside Inc (section)

== History ==

=== Early operations ===

Darkside Inc. operated from 7050-A Bramalea Road, Unit 17, Mississauga, Ontario, Canada.

This address and the company's telephone number, (416) 671-3056, appear in original advertisements preserved by [[VintageRex]].[2][3]

The earliest model documented in the VintageRex catalogue is the Mark II, dated to 1987.[4]

The company's founding date, ownership and initial manufacturing arrangements have not been established.

=== Mark series ===

Darkside manufactured a series of pump-action markers commonly described by collectors as the '''Darkside Uzi''' range because of their appearance.

The markers featured an elongated body resembling a compact submachine gun, with a pistol grip and an integrated paintball magazine.

The Mark II incorporated an angled internal magazine that fed paintballs towards the firing mechanism without requiring a separate hopper.

An original manufacturer advertisement described the magazine as holding up to 38 paintballs.[2]

The later Mark IV retained the general arrangement but incorporated a slanted gravity-fed magazine described by VintageRex as holding approximately 40 paintballs.[5]

Historical equipment specialist [[Bacci Paintball]] identifies the wider range as including Mark I, II, III, IV and V models. However, detailed specifications for every generation have not been established.[6]

=== RAM-68 Auto Trigger ===

Darkside also marketed the '''RAM-68 Auto Trigger''', a .68-calibre marker based on the [[Nel-Spot 007]] operating system.

An original advertisement described the RAM-68 as compatible with both 12-gram CO₂ cartridges and constant-air operation.

The marker was offered with a 14-inch removable barrel, direct-feed arrangement and mechanical auto-trigger.[3]

The RAM-68 differed substantially in appearance and construction from the Mark series.

=== Later history ===

Darkside equipment remained known among paintball collectors after the original models were discontinued.

A 1997 discussion on the ''alt.sport.paintball'' newsgroup documented the RAM-68 and its original accessories, demonstrating that the marker remained familiar to players during the late 1990s.[7]

Historical collector discussions have also noted that Darkside's Mississauga address was associated with [[Brass Eagle]]. The precise business relationship between the two manufacturers has not been independently established.[8]

The date and circumstances of Darkside Inc.'s closure are unknown.